Game Group SandPRO 4516 Manual do Proprietário - Página 11
Procurar online ou descarregar pdf Manual do Proprietário para Filtro de piscina Game Group SandPRO 4516. Game Group SandPRO 4516 18 páginas. 25 pool filter system
Imprimir páginaB. For Pools with 2¼" Diameter Threaded Hose Connectors
These instructions assume that the pool is already assembled with hoses attached to the water intake and return
ports on the pool.
1. Short INTEX® Adapter Installation
a. Screw the short INTEX® adapter into the transparent hair & lint strainer cover
on the water pump.
b. Make certain that O-Ring C (1½" dia) is in place before securing.
2. Pool "Skimmer Hose" Attachment
a. Attach the pool skimmer hose (outlet of pool) to the short INTEX® adapter.
b. Ensure that the flat gasket is installed between the short adapter and the face
of the hose.
3. Long INTEX® Adapter Installation
a. Verify there is a O-Ring inside of the adapter. If not, insert O-Ring.
b. Screw the long INTEX® adapter onto the pool return port on the tank cover.
4. Pool Return Hose Attachment
a. Screw the pool return hose (inlet of pool) to the long INTEX® adapter on the tank cover.
b. Ensure that the flat gasket is inserted between the adapter and the face of the hose.
Note: Be careful not to secure return hose to the waste/backwash port.
Ensure that all hose connections are tight and that the hoses
5. Completed Filter-Pump Installation should resemble the figure shown at right.
IMPORTANT
are NOT kinked or bent at severe angles.
CAUTION
Do not power pump at this point.
11
O-Ring C
Flat Gasket
0-ring
Intex®
Adapter
Flat Gasket
To Pool
Return
From Pool
Skimmer
SAVE THESE INSTRUCTIONS
Intex®
Adapter
0-ring
Hose