Maisi Smart Dashcam Manual de início rápido - Página 10

Procurar online ou descarregar pdf Manual de início rápido para Câmaras de tração Maisi Smart Dashcam. Maisi Smart Dashcam 16 páginas.

4 To Use the Camera for Taking Pictures ONLY

If you want to use the camera to take pictures only (not record), then you can

change it to the Picture Mode. To enter the Picture Mode, press MODE to

change, in Picture Mode, you can see a camera icon like this

located to

the top left corner of the screen.

NOTE: If camera is in Video Mode and it is recording (the red dot

blinking

on top left corner), press REC to stop the recording first, and then press

MODE to go to Picture Mode.

To access the menus for Picture Mode, press

twice on the top of the

camera.

Picture Resolution:

This allows you to choose your desired resolution for the pictures taken. You

can move between the resolution options using

and

buttons, and

press REC to confirm.

Capture Mode: Single, 2S Timer, 5S Timer and 10S Timer

This setting allows you an extra amount of time (usually 2/5/10s) for taking

pictures after the REC button is pressed. You can also set it to Single, if you

wish to take pictures in real time manner. No need to wait.

Sequence:

The sequence function allows you to take 3 images within 1 second. Three

photos will be taken after you press the REC button.

Quality:

The quality settings allow you to adjust the picture quality by enabling a

certain amount of light to pass through a unit area of the lens. You can set it

to Fine, Normal or Economy.

Sharpness:

This feature enables the camera to take pictures with more or less sharpness.

In other words, the camera will increase or decrease pixel proximity

(compressing the image for clarity), depending on the settings you choose.

Page 9