Maisi Smart Dashcam Quick Start Manual - Page 10
Browse online or download pdf Quick Start Manual for Dash Cameras Maisi Smart Dashcam. Maisi Smart Dashcam 16 pages.
Print Page
4 To Use the Camera for Taking Pictures ONLY
If you want to use the camera to take pictures only (not record), then you can
change it to the Picture Mode. To enter the Picture Mode, press MODE to
change, in Picture Mode, you can see a camera icon like this
located to
the top left corner of the screen.
NOTE: If camera is in Video Mode and it is recording (the red dot
blinking
on top left corner), press REC to stop the recording first, and then press
MODE to go to Picture Mode.
To access the menus for Picture Mode, press
twice on the top of the
camera.
Picture Resolution:
This allows you to choose your desired resolution for the pictures taken. You
can move between the resolution options using
and
buttons, and
press REC to confirm.
Capture Mode: Single, 2S Timer, 5S Timer and 10S Timer
This setting allows you an extra amount of time (usually 2/5/10s) for taking
pictures after the REC button is pressed. You can also set it to Single, if you
wish to take pictures in real time manner. No need to wait.
Sequence:
The sequence function allows you to take 3 images within 1 second. Three
photos will be taken after you press the REC button.
Quality:
The quality settings allow you to adjust the picture quality by enabling a
certain amount of light to pass through a unit area of the lens. You can set it
to Fine, Normal or Economy.
Sharpness:
This feature enables the camera to take pictures with more or less sharpness.
In other words, the camera will increase or decrease pixel proximity
(compressing the image for clarity), depending on the settings you choose.
Page 9