HIKVISION D0T Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Câmara de segurança HIKVISION D0T. HIKVISION D0T 17 páginas. Audio turret camera
Também para HIKVISION D0T: Manual do utilizador (17 páginas), Manual do utilizador (17 páginas), Manual do utilizador (15 páginas), Manual do utilizador (11 páginas), Manual do utilizador (11 páginas)

6. Install the camera back to the mounting base and

secure it.

7. Connect the corresponding power cord, and video

cable.

8. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Pan Position

[0° to 360°]

1). Rotate the enclosure to adjust the pan position

[0° to 360°].

2). Move the camera body up and down to adjust

the tilt position [0° to 75°].

3). Rotate the main body to adjust the rotation

position [0° to 360°].

2.1.2 Ceiling/Wall Mounting with Junction Box

Before you start:

You need to purchase a junction box in advance.

Steps:

1. Drill screw holes and the cable hole according on

the wall.

2. Take apart the junction box, and align the screw

holes of the mounting base with those on the

Junction box's cover.

3. Install the mounting base to the junction box's cover

with three PM4 screws.

Figure 2-6 Secure screws on the Junction Box's Cover

4. Secure the junction box's body on the wall with four

PA4 × 25 screws.

Figure 2-4 Install the Camera Back

Tilt Position

[0° to 75°]

Figure 2-5 3-Axis Adjustment

Rotation Position

[0° to 360°]