HIKVISION D0T 사용자 설명서 - 페이지 7

{카테고리_이름} HIKVISION D0T에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION D0T 17 페이지. Audio turret camera
HIKVISION D0T에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (11 페이지), 사용자 설명서 (11 페이지)

페이지 인쇄
HIKVISION D0T 사용자 설명서
6. Install the camera back to the mounting base and
secure it.
7. Connect the corresponding power cord, and video
cable.
8. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Pan Position
[0° to 360°]
1). Rotate the enclosure to adjust the pan position
[0° to 360°].
2). Move the camera body up and down to adjust
the tilt position [0° to 75°].
3). Rotate the main body to adjust the rotation
position [0° to 360°].
2.1.2 Ceiling/Wall Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
Steps:
1. Drill screw holes and the cable hole according on
the wall.
2. Take apart the junction box, and align the screw
holes of the mounting base with those on the
Junction box's cover.
3. Install the mounting base to the junction box's cover
with three PM4 screws.
Figure 2-6 Secure screws on the Junction Box's Cover
4. Secure the junction box's body on the wall with four
PA4 × 25 screws.
Figure 2-4 Install the Camera Back
Tilt Position
[0° to 75°]
Figure 2-5 3-Axis Adjustment
Rotation Position
[0° to 360°]