HIKVISION D0T 사용자 설명서 - 페이지 9

{카테고리_이름} HIKVISION D0T에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION D0T 17 페이지. Audio turret camera
HIKVISION D0T에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (15 페이지), 사용자 설명서 (11 페이지), 사용자 설명서 (11 페이지)

페이지 인쇄
HIKVISION D0T 사용자 설명서
4. Route the cables through the cable hole, or the side
opening.
5. Install the camera back to the mounting base and
secure it.
Figure 2-11 Install the Camera Back
6. Connect the corresponding power cord, and video
cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Pan Position
[0° to 360°]
2.2.2 Ceiling/Wall Mounting with Junction Box
Before you start:
You need to purchase a junction box in advance.
1. Paste the drill template on the ceiling/wall.
2. Drill screw holes and the cable hole according to the
drill template.
Figure 2-13 Drill Template of the Junction Box
3. Take apart the junction box, and align the screw
holes of the mounting base with those on the
Junction box's cover.
4. Install the mounting base to the junction box's cover
with screws.
Figure 2-14 Install the Mounting Base
Tilt Position
[0° to 75°]
Figure 2-12 3-Axis Adjustment
Rotation Position
[0° to 360°]