Adexa HEL-707A Manual de instruções - Página 3

Procurar online ou descarregar pdf Manual de instruções para grelha Adexa HEL-707A. Adexa HEL-707A 6 páginas. Electric lava rock grill with cabinet

Imprimir página

Instruction Manual

3、Electrical schematic diagram

EH1~EH6——Heating tube

ST1、ST2——Thermostat

KM1、KM2——AC contactor

HL1、HL3——Power Indicator Lamp

HL2、HL4——Heating indicator

4、 Operating procedures:

1. To check whether the installation of power supply is normal, it is necessary to ensure that the

supply voltage is in line with the use voltage of furnaces.

2. Two temperature controllers are set on the front panel of the furnace body, which can be used

alone or simultaneously. The left temperature controller controls the left furnace body, and the

right temperature controller controls the right furnace body.

3. Turn on the power supply and the green indicator lights on. At this time, the current has been

supplied to the furnace. Rotate the thermostat clockwise and set the required temperature

according to the requirements of food production. At this time, the yellow indicator light is on,

indicating that the electric heat pipe has been working and began to heat up.

4. Temperature can be selected according to the type of food, and 180-250 degrees Celsius is the

appropriate temperature. It takes about 10-15 minutes from the power supply to the temperature

of the furnace body reaching 250 C.

5. When the temperature reaches the set value and the thermostat can automatically cut off the

power supply, the yellow indicator lights out, the electric heat pipe stops working, and the

L1 L2 L3

ST1

KM1

EH1 EH2 EH3

HL1

HL2 KM1

EH1 EH6

发热管

ST1

ST2

、

温控器

KM1

KM2

交流接触器

、

HL1

HL3

电源指示灯

、

HL2

HL4

、

加热指示灯

ST2

KM2

EH4 EH5 EH6

HL3

HL4 KM2