Adexa HEL-707A Manual de instruções - Página 4

Procurar online ou descarregar pdf Manual de instruções para grelha Adexa HEL-707A. Adexa HEL-707A 6 páginas. Electric lava rock grill with cabinet

Instruction Manual

furnace body is in a constant temperature state. When the temperature drops, the thermostat

automatically turns on the power supply, and the electric heat pipe resumes heating, so

repeatedly.

6. After the temperature reaches 250 C, a layer of edible vegetable oil is coated on the surface of

the barbecue net, and then the food to be barbecued is evenly placed on the barbecue net for

operation.

7. When the work is finished, please rotate the thermostat counterclockwise to the closed position

and cut off the power supply to ensure safety.

5、matters needing attention in installation:

1. The operating voltage of the equipment must be in accordance with the supply voltage.

2. Users need to install appropriate leakage protection switches near the equipment.

3. There are copper equipotential terminals under the back of the furnace body. The copper core

conductor of no less than 1.5 mm 2 is used to connect reliably with the ground wire according to

the regulations.

4. The installation of this stove should be operated by professional and technical personnel.

5. Before use, check whether the wiring is loose, whether the voltage is normal and whether the

safe grounding is reliable.

6. The shell of the machine must be grounded to ensure safety.

7. Clean before use, cut off the power supply, scrub with non-corrosive detergent and wet cloth,

and prohibit water gun cleaning.

8. Flammable and explosive articles should not be stored near the installation location. The

ambient temperature is below 45 C and the relative humidity is below 85%.

9. The equipment should be placed in a stable place, with at least 10 cm of space between other

objects and 20 cm away from walls and windows on the back.

This product needs to be operated by a trained chef or experienced person.

No modification! The modification of products will lead to serious accidents.

Before cleaning, cut off the power supply.

When cleaning, do not flush the original stoves or appliances with water. Hydroelectric conductivity,

product will cause electric shock accident due to water leakage

High temperature can cause burns. Because of the high temperature, do not touch the box directly with your

hands, especially in the high temperature picking area.

It is forbidden to use power sources other than the voltage indicated by the product.

It is forbidden to use switches that do not conform to safety regulations.

When lightning approaches, the power supply should be disconnected to stop using. Avoid electrical

damage caused by lightning strike.

It is forbidden to use hard and sharp objects to destroy the surface of furnace body and electric heat pipe.

Installation and maintenance of electrical appliances must be carried out by qualified professionals.

Hands should be dry when installed and used, plugs and switches should be kept dry.

Special attention