IKEA ENHET Manual de instalação - Página 10

Procurar online ou descarregar pdf Manual de instalação para Mobiliário de interior IKEA ENHET. IKEA ENHET 20 páginas. Kitchen
Também para IKEA ENHET: Manual de instalação (10 páginas), Manual de instalação (16 páginas)

Imprimir página

Installing the base cabinets/frames

Once you are done with the installation of the wall

'cabinets, move on to the base cabinets. Again, start

from the corner if you have an L-shaped layout. If

not, start from one end and move on. Just make sure

that you follow the marks you made for your kitchen

layout. If you build a line kitchen, make sure you leave

some space between the wall and the cabinet to allow

for doors or drawers to open properly.

If you build a corner base solution with a 12" (305 mm)

door, place the cabinet 3" (76.2 mm) from the wall (A). If

you build it with a 18" (454 mm) door, place the cabinet

9" (228,6 mm) from the wall (A).

As you proceed with the next cabinet, level and align

the two cabinets by using a clamp. Use the screws

provided to attach the adjacent cabinets. Don't forget to

level your units.

To install a cabinet after the dishwasher niche, make

sure the spirit level reaches both cabinets at the front

and at the back of the cabinets. Make sure the distance

at the front and back of the niche remains 18", 24". Once

you have the correct alignment, secure the cabinet to

the wall.

If you have a corner kitchen, you build the corner

base solution with a 36" (915 mm) base cabinet in

combination with the ENHET corner panel. For this

solution, follow the assembly instructions included

with the ENHET corner panel.

NOTE! ENHET open frames can't be used under a sink,

built-in cooktop or for a built-in oven.

Proceed with the next cabinet, working with the legs

adjust the cabinets to the base top line. Same

procedure as for the wall units. Level and align it.

When you reach the place where you want your sink

and faucet, use the designated ENHET cabinet for sinks,

which is constructed to allow for pipes coming from

either the wall or the floor. See assembly instructions

for how to build the different configurations.

When installing an open base frame, don't use a

supporting strip. Instead, use the suspension rail the

same way as when you mounted the wall frames. Align

the top of the open frame with the top of the adjacent

cabinet before you fix the frame to the wall. Follow the

assembly instructions to mount and safely secure the

open frame to the suspension rail and wall.

Fix the cabinet using the appropriate type and length

of screw. (Throughout the installation process you may

need to loosen the screws a bit in order to make

smaller adjustments when aligning the cabinets and

frames.)

For your size of (18" or 24") dishwasher, both scenarios,

another cabinet or a dishwasher end panel, follow the

marks in the wall and leave the space empty to carry on

your installation.

Once all your base cabinets/frames are installed, check

that they are level and that you are happy with the

result before securing them by tightening the screws

a final time.