IKEA ENHET Manual de instalação - Página 12
Procurar online ou descarregar pdf Manual de instalação para Mobiliário de interior IKEA ENHET. IKEA ENHET 20 páginas. Kitchen
Também para IKEA ENHET: Manual de instalação (10 páginas), Manual de instalação (16 páginas)
Imprimir página
Installing the sink and faucet
Before you start to install the kitchen mixer faucet,
switch off the main shutoff valve, and also double-
check that the connections between the water supply
and the faucet fit. Keep in mind that the installation
must be performed in compliance with current local
construction and plumbing regulations. If in doubt,
contact a professional.
If you need to install the faucet on the countertop, see
the faucet's assembly instructions for the dimension of
the hole. Once you've marked the position of the hole,
check that it doesn't collide with the top rail of the
cabinet underneath. After you've drilled the hole, clean
and seal the hole with silicone.
12
While some of our sinks come with a pre-cut hole for
the faucet, there are cases where you need to install
it on the countertop. If this is the case, make sure you
use a drill that is powerful enough to drill through the
countertop material.
NOTE! The installation of the water trap and water is
not done or finalized until the plumbing is connected
by an professional plumber and confirmed by them
that it's safe to use.
Before sliding the sink into position, follow the
assembly instruction of the sink and attach the clamps
that comes with it. Once in position, adjust the clamps
in order to mount the sink.
Once the sink and faucet are in place and secured, seal
the edges around them with silicone for a watertight
seal.