IKEA ENHET Manual de instalação - Página 14

Procurar online ou descarregar pdf Manual de instalação para Mobiliário de interior IKEA ENHET. IKEA ENHET 20 páginas. Kitchen
Também para IKEA ENHET: Manual de instalação (10 páginas), Manual de instalação (16 páginas)

Imprimir página

Installing the plinth

NOTE! If you're not installing plinths, please move on

to next chapter.

Generally, the base cabinets are fixed to wall and

supported by legs in the front of the cabinets.

However, if you are going for a kitchen with a plinth,

you also need to consider the following steps:

For a plinth setup, place the legs with the leg-plate

aligned to the cabinet edge. Since the plinth is attached

via the legs, you also need an additional leg at the back

of the cabinet sides.

For the front plinth, place the plinth in position and

mark where to cut it. After you've cut it, repeat the

process of attaching the edge band and the plastic

fittings that connect with the leg.

Start with the plinth for the short side of the cabinet

and use a handsaw to cut a 22⅛" (562 mm) piece. Then,

sand the open edge before you apply the pre-glued

edge band that comes with the plinth.

When two plinth sections meet and form a corner, you

need to attach both plinth strips to the same leg. In

order to avoid the clips colliding, place the clips upside

down in one of the strips.

Follow the assembly instructions to attach the plinth.

Remember to remove the plastic sleeves of the leg since

they will obstruct the attachment of the plinth.

NOTE! ENHET open frames can't be combined with a

plinth. For ENHET frames, use ENHET legs for frames.