Gamma Progression ES II+ Manual do Proprietário - Página 4

Procurar online ou descarregar pdf Manual do Proprietário para Máquinas de encordoar Gamma Progression ES II+. Gamma Progression ES II+ 17 páginas.

ASSEMBLY INSTRUCTIONS

provided with the machine in the event the lever lock bolts become inconvenient. Simply install

the M10 screws in place of the lever lock bolts and tighten with the wrench provided.

Turntable Installation

Insert the turntable center post into the

bushing of the stringing machine base.

Frame Support Post Installation

The ESII+ support post assemblies are pre-

cision aligned at the factory and are marked

for proper installation on the turntable.

Install the support post with the dot on its

base to an identical dot on the turntable.

Align the threaded hole in the bottom of the

frame support post with the slot in the turn-

table. Screw the lever lock bolt with washer

into the bottom of the support post and

tighten gently.Position the washer the

rounded edge toward the turntable. Repeat

procedure on the opposite side of the turn-

table.

NOTE: 2 pcs. of M10 cap screws (#170) are

Clamp Head Installation

The post of the string clamp head and tube

of the string clamp base are treated with

grease to provide protection against corro-

sion during shipping. Remove any exces-

sive grease with a clean cloth prior to use.

The post and tube may also be cleaned with

isopropyl alcohol. After this type of thorough

cleaning, the post and tube should be treated

with a light coating of machine oil to protect

the surfaces against corrosion and to en-

sure smooth operation.