Jalousie-Welt Pergola PRO Funcionamento e manutenção, instruções de envio, desembalagem e instalação - Página 17
Procurar online ou descarregar pdf Funcionamento e manutenção, instruções de envio, desembalagem e instalação para Acessórios Jalousie-Welt Pergola PRO. Jalousie-Welt Pergola PRO 20 páginas.
Imprimir páginaSpecial bracket for the gutter system
3.8.7. Perform electrical installation (only for motor drive)
When laying the motor cable, make sure that no kinks or any sharp edges they can damage the cable. The
long-term operation of the awning with electric motor drive via electrical socket is not permitted! The
awnings switch should be mounted at a height of 125 cm over the ground in a location from which the user
sees the awning across its whole range of motion. The used switch must be designed by the manufacturer to
control awnings.
3.8.8. Set the end positions of the motor
After assembly of the awning, you should set the end position of the two directions, in accordance with the
instructions for the motor drive. The factory end position are set by manufacturer.
gutter
water pipe
concrete
C20/25
CAUTION!
The electrical connection must be performed by a licensed professional. Connect the
electrical wires according to the circuit diagram. The awning may only be connected if
the specifications on the type plate agrees with your power source.
CAUTION!
If worn or damaged cables, awning do not use until repaired by an authorized
technician.
pilar
special
bracket
page: 17 / 20