IKEA DATID HGA4K Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Hob IKEA DATID HGA4K. IKEA DATID HGA4K 16 páginas. Lagan
Também para IKEA DATID HGA4K: Instruções (4 páginas), Manual (24 páginas), Manual de instruções de montagem (20 páginas), Manual (12 páginas)

Imprimir página

ENGLISH

The graphic above represents rating plate of

the appliance (without serial number which is

generated dynamically during the production

process), which is located at its underneath

surface of the casing.

Installation

Manufacturer is not responsible for any injury

to persons and pets or damage to property

caused by failure to comply following require-

ments.

Caution! To proceed with the installation

refer to the assembly instructions.

Warning! Installation process must follow

the laws, ordinances, directives and

standards (electrical safety rules and

regulations, proper recycling in accordance

with the regulations, etc.) in force in the country

of use!

Ensure that the local distribution condi-

tions (nature of the gas and gas pressure)

and the adjustment of the appliance are com-

patible before proceeding with the installa-

tion.

The parameters of adjustment setting for

this appliance are stated on the rating

plate (refer to the Technical data chapter).

Warning! The appliance must be

earthed!

Warning! Risk of injury from electrical

current.

• The electrical mains terminal is live.

• Make electrical mains terminal free of volt-

age.

• Loose and inappropriate plug and socket

connections can make the terminal over-

heat.

Dear Customer, please apply here aside the

sticker you can find in the dedicate plastic bag

inserted inside the hob packaging. This will al-

low us to assist you better, by identifying pre-

cisely your hob, in case you will need in future

our assistance. Thank you for your help!

• Have the clamping connections correctly in-

stalled.

• Use strain relief clamp on cable.

Important! You must observe the minimum

distances to other appliances and furniture

cabinets or other units according to Assembly

Instruction.

If there is no oven beneath the hob insert a di-

viding panel at a minimum distance of 20 mm

from the bottom of the hob.

Protect the cut surfaces of the worktop against

moisture using a suitable sealant included in

the product in fitting bag. The sealant seals the

appliance to the work top with no gap. Do not

use silicon sealant between the appliance and

the worktop. Avoid installing the appliance

next to doors and under windows as hot cook-

ware may be knocked off the pan support

when doors and windows are opened.

Only an authorized service engineer can in-

stall, connect or repair this appliance. Any gas

installation must be carried out by a GAS SAFE

parts.

Gas Connection

Warning! This appliance is not

connected to a combustion products

evacuation device.

Installation must comply with current local reg-

ulation.