IKEA IHI8304WS0 Instruções de instalação e manual de utilização e cuidados - Página 9

Procurar online ou descarregar pdf Instruções de instalação e manual de utilização e cuidados para Campânula de ventilação IKEA IHI8304WS0. IKEA IHI8304WS0 28 páginas. 30" (76.2 cm) island canopy range hood

Imprimir página

5. Connect lamp and control panel's cable connectors to the

4. Screw the upper covers together using the 6 screws

blower motor connectors,

provided.

A. Control panel connection

B. Lamp connection

For non-vented (recirculating)

installations, install the

charcoal filter. See "Range Hood Care" section.

Vented Installation

- Style 1

1. Insert captive nuts on the inside of the vent covers at all

12 rectangular hole locations.

Remove the plastic covering from the chimney covers.

Place the upper chimney covers around the chimney support

so that the vent slots on the front cover face the same

direction as the control panel.

A. Screw

5. Push the upper cover assembly up against ceiling.

6. Attach the upper cover assembly to the vent cover support

brackets with two screws (one on each side).

7. Place the lower vent covers around the chimney structure so

that the cover with the captive nuts is to the rear of the hood.

A. Lower vent cover with captive nuts

B. Lower vent cover

A. Upper chimney covers