IKEA IHI8304WS0 Installationsanleitung und Gebrauchs- und Pflegeanleitung - Seite 9
Blättern Sie online oder laden Sie pdf Installationsanleitung und Gebrauchs- und Pflegeanleitung für Lüftungshaube IKEA IHI8304WS0 herunter. IKEA IHI8304WS0 28 Seiten. 30" (76.2 cm) island canopy range hood
Seite drucken5. Connect lamp and control panel's cable connectors to the
4. Screw the upper covers together using the 6 screws
blower motor connectors,
provided.
B
A
6.
A. Control panel connection
B. Lamp connection
For non-vented (recirculating)
installations, install the
charcoal filter. See "Range Hood Care" section.
Vented Installation
- Style 1
1. Insert captive nuts on the inside of the vent covers at all
12 rectangular hole locations.
2.
3.
Remove the plastic covering from the chimney covers.
Place the upper chimney covers around the chimney support
so that the vent slots on the front cover face the same
direction as the control panel.
A
A. Screw
5. Push the upper cover assembly up against ceiling.
6. Attach the upper cover assembly to the vent cover support
brackets with two screws (one on each side).
7. Place the lower vent covers around the chimney structure so
that the cover with the captive nuts is to the rear of the hood.
J
A. Lower vent cover with captive nuts
B. Lower vent cover
A
A. Upper chimney covers