HIKVISION TurboHD H0T Series Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Câmara de segurança HIKVISION TurboHD H0T Series. HIKVISION TurboHD H0T Series 17 páginas. Turbo hd bullet & dome camera
Também para HIKVISION TurboHD H0T Series: Manual do utilizador (17 páginas), Manual do utilizador (16 páginas), Manual do utilizador (17 páginas), Manual do utilizador (13 páginas), Manual do utilizador (18 páginas), Manual do utilizador (15 páginas), Manual do utilizador (15 páginas)

Figure 2-12 Disassemble the Camera

2. Pry the snap joint anticlockwise to remove the

bubble, and the black liner.

3. Attach the drill template (supplied) to the place

where you want to install the camera, and then drill

the screw holes, and the cable hole (optional)

according to the drill template on the ceiling.

Note:

Cable hole is required when adopting ceiling outlet

to route the cable.

4. Attach the mounting base to the ceiling, and secure

them with supplied screws

Figure 2-15 Attach the Mounting Base to the Ceiling

5. Route the cables through the cable hole (optional),

or the side opening.

Figure 2-13 Remove the Bubble

Figure 2-14 Drill Template

Snap Joint

2-Φ4.5

Φ98.0