HIKVISION TurboHD H0T Series Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HIKVISION TurboHD H0T Series. HIKVISION TurboHD H0T Series 17 pages. Turbo hd bullet & dome camera
Également pour HIKVISION TurboHD H0T Series : Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (16 pages), Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (13 pages), Manuel de l'utilisateur (18 pages), Manuel de l'utilisateur (15 pages), Manuel de l'utilisateur (15 pages)

Figure 2-12 Disassemble the Camera

2. Pry the snap joint anticlockwise to remove the

bubble, and the black liner.

3. Attach the drill template (supplied) to the place

where you want to install the camera, and then drill

the screw holes, and the cable hole (optional)

according to the drill template on the ceiling.

Note:

Cable hole is required when adopting ceiling outlet

to route the cable.

4. Attach the mounting base to the ceiling, and secure

them with supplied screws

Figure 2-15 Attach the Mounting Base to the Ceiling

5. Route the cables through the cable hole (optional),

or the side opening.

Figure 2-13 Remove the Bubble

Figure 2-14 Drill Template

Snap Joint

2-Φ4.5

Φ98.0