HIKVISION TurboHD H0T Series Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} HIKVISION TurboHD H0T Series. HIKVISION TurboHD H0T Series 17 pages. Turbo hd bullet & dome camera
Également pour HIKVISION TurboHD H0T Series : Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (16 pages), Manuel de l'utilisateur (17 pages), Manuel de l'utilisateur (13 pages), Manuel de l'utilisateur (18 pages), Manuel de l'utilisateur (15 pages), Manuel de l'utilisateur (15 pages)

5. Connect the corresponding power cord, and video

cable.

6. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the surveillance angle.

1). Loosen the No.1 adjusting screw to adjust the

rotation position [0° to 360°]. Tighten the No.1

adjusting screw.

2). Loosen the No.2 adjusting screw to adjust the

tilting position [0° to 180°]. Tighten the No. 2

adjusting screw.

3). Loosen the No.3 adjusting screw to adjust the

pan position [0° to 360°]. Tighten the No.3

adjusting screw.

2.3 Ceiling Mounting of Type III Camera

Steps:

1. Paste the dill template to the ceiling.

2. Drill the screw holes and cable hole (optional) in the

ceiling according to the drill template.

Note:

Cable hole is required, when adopting the ceiling

outlet to route cables.

3. Loosen the set screws with a hex wrench (supplied)

to remove the bubble.

4. Fix the mounting base on the ceiling with supplied

screws.

Figure 2-6 3-Axis Adjustment

Drill Template

Hole A: for cables routed through the ceiling

screw hole 1: for Mounting Base

Figure 2-7 Drill Template

Figure 2-8 Remove the Bubble

Screw

Hole

Cable

Hole