Ganz Thermal PT Thermal Series Manual de início rápido - Página 7
Procurar online ou descarregar pdf Manual de início rápido para Câmaras térmicas Ganz Thermal PT Thermal Series. Ganz Thermal PT Thermal Series 9 páginas.
Imprimir páginaPT Thermal Series Quick Start Guide
Ganz PT Thermal Connections and Pin-Out
7.
Attach the top hat to the Ganz PT Thermal and secure with the
attached four screws using a screwdriver with a T20 Torx bit to
approximately 16 in-lbs. of torque.
Mounting the Ganz PT Thermal Camera
1.
Attach the camera to the strain relief wire on the wall mount by
placing the loop of the wire through the hook of the top hat. This
will support the weight of the camera for the rest of the
installation.
2.
Align the screw heads of the top hat with holes in the mount and
push the camera up to insert the screw heads. Turn the camera to
the right to lock the camera in place.
3.
Secure the camera with the attached screws on the mount. Refer
to mount directions for specific instructions on the required bit and
torque.
7
www.ganzsecurity.com
December 2013
Ganz PT Thermal Camera mounted on
a Standard Wall Bracket (WMK3-1W).