Makita 3706 Manual de instruções - Página 6
Procurar online ou descarregar pdf Manual de instruções para Ferramenta eléctrica Makita 3706. Makita 3706 10 páginas. Cutout tool
Também para Makita 3706: Manual de instruções (14 páginas), Manual de peças (2 páginas), Manual de instruções (17 páginas), Manual de instruções (13 páginas), Manual de instruções (12 páginas)
Imprimir página
To adjust the shoe, turn the thumb screw
to loosen. Slide the shoe to the desired
position and tighten the thumb screw
securely. Check for the proper clearance
beneath the workpiece before cutting
so
that the bit will not strike a hard surface
such as the floor, workbench, etc.
Switch action
CAUTION:
Before plugging in the tool, always check to see that the switch lever actuates properly
and returns to the "OFF" position.
Shoe
Thumb screw
To start the tool, move the switch lever to
the "ON" position. To stop the tool, move
the switch lever to the "OFF" position. This
can be done in the forward area of the
switch lever or by bumping off the rear area
of the switch lever.
Switch lever
Bump off
switch
I I
ASSEMBLY
Installing or removing the bit
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing
the bit.
To install the bit, insert the bit all the way
into the collet cone. Press the shaft lock to
keep the shaft stationary and use the
wrench to tighten the collet nut securely.
6