Makita 3706 사용 설명서 - 페이지 6

{카테고리_이름} Makita 3706에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3706 10 페이지. Cutout tool
Makita 3706에 대해서도 마찬가지입니다: 사용 설명서 (14 페이지), 부품 설명서 (2 페이지), 사용 설명서 (17 페이지), 사용 설명서 (13 페이지), 사용 설명서 (12 페이지)

페이지 인쇄

To adjust the shoe, turn the thumb screw

to loosen. Slide the shoe to the desired

position and tighten the thumb screw

securely. Check for the proper clearance

beneath the workpiece before cutting

that the bit will not strike a hard surface

such as the floor, workbench, etc.

Switch action

CAUTION:

Before plugging in the tool, always check to see that the switch lever actuates properly

and returns to the "OFF" position.

Shoe

Thumb screw

To start the tool, move the switch lever to

the "ON" position. To stop the tool, move

the switch lever to the "OFF" position. This

can be done in the forward area of the

switch lever or by bumping off the rear area

of the switch lever.

Switch lever

Bump off

switch

I I

ASSEMBLY

Installing or removing the bit

CAUTION:

Always be sure that the tool is switched off and unplugged before installing or removing

the bit.

To install the bit, insert the bit all the way

into the collet cone. Press the shaft lock to

keep the shaft stationary and use the

wrench to tighten the collet nut securely.