Makita 3706 사용 설명서 - 페이지 8
{카테고리_이름} Makita 3706에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3706 10 페이지. Cutout tool
Makita 3706에 대해서도 마찬가지입니다: 사용 설명서 (14 페이지), 부품 설명서 (2 페이지), 사용 설명서 (17 페이지), 사용 설명서 (13 페이지), 사용 설명서 (12 페이지)
페이지 인쇄
When cutting straight line, clamp a straight
board firmly to the material and use
it
as a
guide. Move the tool
in
the direction of the
arrow with the shoe base flush with the
side of the guide board.
When the cut is complete, turn the tool off and wait for the bit to stop rotating and then
carefully remove it from the material.
Notes:
1. When using the tool, the rotating action causes the tool to pull. The less pressure
applied to the tool causes less pull and provides a more accurate cut. Excessive pres-
sure or fast cutting can cause the bit to dull or break premature,
2. When cutting drywall around outlet boxes, cut in
a counterclockwise direction for ease
of cut.
3. The standard bit included with this tool is for cutting drywall only. When cutting mate-
rials other than drywall, do not use the standard drywall guide bit.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and unplugged before attempting to perform
inspection or maintenance.
To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and
replacement, or any other maintenance or adjustment should be performed by Makita
Authorized or Factory Service Centers, always using Makita replacement parts.
8