Makita 3706 Kullanım Kılavuzu - Sayfa 8

Elektrikli Alet Makita 3706 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Makita 3706 10 sayfaları. Cutout tool
Ayrıca Makita 3706 için: Kullanım Kılavuzu (14 sayfalar), Parça Kılavuzu (2 sayfalar), Kullanım Kılavuzu (17 sayfalar), Kullanım Kılavuzu (13 sayfalar), Kullanım Kılavuzu (12 sayfalar)

When cutting straight line, clamp a straight

board firmly to the material and use

as a

guide. Move the tool

the direction of the

arrow with the shoe base flush with the

side of the guide board.

When the cut is complete, turn the tool off and wait for the bit to stop rotating and then

carefully remove it from the material.

Notes:

1. When using the tool, the rotating action causes the tool to pull. The less pressure

applied to the tool causes less pull and provides a more accurate cut. Excessive pres-

sure or fast cutting can cause the bit to dull or break premature,

2. When cutting drywall around outlet boxes, cut in

a counterclockwise direction for ease

of cut.

3. The standard bit included with this tool is for cutting drywall only. When cutting mate-

rials other than drywall, do not use the standard drywall guide bit.

MAINTENANCE

CAUTION:

Always be sure that the tool is switched off and unplugged before attempting to perform

inspection or maintenance.

To maintain product SAFETY and RELIABILITY, repairs, carbon brush inspection and

replacement, or any other maintenance or adjustment should be performed by Makita

Authorized or Factory Service Centers, always using Makita replacement parts.