Avantco Equipment QuickShot QS-1800 Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Utensílios de cozinha Avantco Equipment QuickShot QS-1800. Avantco Equipment QuickShot QS-1800 10 páginas. Countertop tortilla/portion steamer
Também para Avantco Equipment QuickShot QS-1800: Manual do utilizador (10 páginas)

Imprimir página

1. Parts List

User Manual

Remove the spray tube and water tank filter to examine if calcium or mineral deposits remain, then use a paper clip to remove

any remaining build-up and rinse using vinegar and water.

Slide metal cover back onto the tube and replace water tank filter inside water tank

Pour 1 Cup of white vinegar onto the generator surface and let soak for 15 minutes

Rinse the generator surface and scrape off any remaining calcium or mineral build-up

Wipe generator clean with a damp cloth and reassemble unit and spray tube

If excessive mineral deposits remain after cleaning, follow the directions below:

Treat generator surface with a delimer solution. Follow all instructions and safety precaution as stipulated by the

delimer's manufacturer. If using a chemical cleaner, make sure it is safe to use on the generator surface.

Remove delimer solution from generator with a sponge or dry towel. Rinse generator with clean water.

NOTE: Some calcium/mineral build-up is required on the generator surface for proper steaming. If all build-up

is removed during cleaning, add distilled water to surface, and allow it to boil off. Repeat as needed until the

generator surface is thinly coated in calcium/mineral deposits.

NOTE: It may be necessary to season the generator surface with lime if using soft water. Seasoning creates a thin

coating of calcium/mineral deposits on the generator to ensure proper steaming.

To season, mix 3/4 oz. baking soda, 3/4 oz. lime, and 1 qt. water. Pour 1/4" deep onto hot generator surface. Allow

the mixture to boil off. Remove any loose powder that remains.

Plug power cord into electrical outlet.

Flip the on/off switch to the 'on' position. Allow steamer to preheat for 30 minutes.

Press and release steam button several times to purge delimer residue from generator.

Flip on/off switch to the 'off' position. Reinstall parts and accessories.