CORNING Universal Access Tool 3 Manual de Instruções
Procurar online ou descarregar pdf Manual de Instruções para Ferramentas CORNING Universal Access Tool 3. CORNING Universal Access Tool 3 9 páginas.
Também para CORNING Universal Access Tool 3: Manual de Instruções (18 páginas)
Imprimir páginaCorning Cable Systems
CORNING
SRP-004-074
Issue
11
November 2008
Pageloh6
Universal Access
Tool 3
Operating Instructions
Figure 1
1. General........................................................................................
1
2. Precautions..................................................................................
3
3. Kit Contents, Tools and Materials.............................................
4
\
4. Closure Preparation ...... ................................ .............................
5
5. Tool Preparation and Initial Adjustment..................................... 6
6. Closure or Terminal Preparation................................................. 8
7. Accessing a Tube................ ...................... ...................................
8
8. Preparing the Fibers for Splicing............................................... 14
9. Tool Storage and Cleaning........................................................
14
10. Blade Replacement ..................................................................... 15
11. Troubleshooting......................................................................... 16
Note: This issue includes additirmal cable sizes in Table 1.
1. General
1.1 The Corning Cable Systems Universal Access Tool 3 (UAT3) is designed
to
access individual fibers or ribbons in single tube cables in a mid-span location
(Figure 1). The tool, Corning Cable Systems part number UAT3-000, is designed
to access fibers in buffer tubes from 5 to 24 rom in outer diameter.
1.2 This procedure describes the use of the access tool and illustrates how to
access fibers or ribbons in Corning Cable Systems single tube ribbon, stranded
loose tube ribbon, and single tube (loose or bundled fiber) cable designs (see
Table 1 on page 7).
Other manufacturer's tubes may require blade adjustment derived through experimental
cuts on scrap tube sections.
SRP- 004-074 (402671)