Lexmark CS410 series Manual de referência rápida - Página 2

Procurar online ou descarregar pdf Manual de referência rápida para Impressora Lexmark CS410 series. Lexmark CS410 series 11 páginas. Color laser printer
Também para Lexmark CS410 series: Nota técnica (3 páginas), Folha de configuração (2 páginas), Manual (19 páginas), Manual de impressão (8 páginas), Manual de referência rápida (14 páginas), Manual de qualidade da cor (6 páginas), Manual de ligação (6 páginas), Manual de papel (4 páginas), Mapa do menu (2 páginas), Manual de mudanças (2 páginas), Manual de informações (1 páginas), Ficha de dados (2 páginas), Ficha de dados (2 páginas), Manual de serviço (18 páginas)

Press the up or down arrow button to select the paper type, and

then press

Configuring Universal paper settings

The Universal paper size is a user‑defined setting that lets you print on

paper sizes that are not preset in the printer menus.

Notes:

•

The smallest supported Universal size is 76 x 127 mm (3 x 5

inches) and is loaded only in the multipurpose feeder and

manual feeder.

•

The largest supported Universal size is 215.9 x 359.9 mm (8.5 x

14.17 inches) and is loaded only in the multipurpose feeder and

manual feeder.

From the printer control panel, navigate to:

> Settings >

> Paper Menu >

> Units of Measure >

> select a unit of measure >

Press the up or down arrow button until Portrait Height or

Portrait Width appears, and then press

Enter the preferred settings using the keypad or press the left or

right arrow button to manually select the size you want, and then

press

Press

Loading the 250‑ and 550‑sheet tray

The printer has one 250-sheet tray (Tray 1) with an integrated manual

feeder. The 250-sheet tray, the 650-sheet duo tray, and the 550-sheet

tray support the same paper sizes and types and are loaded in the same

way.

CAUTION—POTENTIAL INJURY: To reduce the risk of

equipment instability, load each tray separately. Keep all other

trays closed until needed.

Pull out the tray completely.

Note: Do not remove trays while a job is printing or while Busy

appears on the display. Doing so may cause a jam.

If the paper is longer than letter‑size paper, then squeeze and then

slide the length guide at the back of the tray to extend it.

> Universal Setup >

Squeeze, and then slide the length guide tab to the correct position

for the size of the paper being loaded.

Note: Use the paper size indicators on the bottom of the tray to

help position the guide.