KitchenAid KHMC106W Manual de instruções de instalação - Página 4

Procurar online ou descarregar pdf Manual de instruções de instalação para Forno micro-ondas KitchenAid KHMC106W. KitchenAid KHMC106W 16 páginas. 30" built-in microwave/convection hood

Imprimir página

WALL CONSTRUCTION

Personal Injury or Property Damage Hazard

This microwave oven must be mounted against and supported

by a flat, vertical wall.

This microwave oven must be attached with two lag screws to a minimum of one, vertical 2" x 4"

wall stud.

Do Not mount microwave oven to an Island or peninsula cabinet.

The microwave oven top and rear supporting

structures must be capable of supporting

127 Ibs.,

plus the weight of any items placed inside the microwave oven or upper cabinet.

Failure to mount the microwave oven as instructed

could result in personal injury and/or property

damage.

To find the location of the studs, one of the following

methods may be used:

Stud Finder -- a magnetic

device which locates nails in the stud.

B. Use a hammer to tap lightly across the mounting

surface to find

solid sound. This will indicate a stud location.

2" x 4"

WOOD STUDS

The centerofthe

stud can be located by probing the wall with a small nail to find the edgesofthestud

and then placing

a mark halfway between the edges. The center of any adjacent studs will normally

be 16" or 24" to either side of this

mark.

NOTE:

In the event that the unit will be unable to be supported by any stud, it will be necessary to use special care

in the placement

of the toggle bolts and top cabinet screws. See Wall Template

for details.

The top cabinet should

be tested to ensure it is securely attached to the wall.

Place extra weight up to 127 pounds inside the top cabinet

to test the support.