KitchenAid KHMC106W Manual de instruções de instalação - Página 5

Procurar online ou descarregar pdf Manual de instruções de instalação para Forno micro-ondas KitchenAid KHMC106W. KitchenAid KHMC106W 16 páginas. 30" built-in microwave/convection hood

Imprimir página
ELECTRICAL REQUIREMENTS
Electrical ground is required on this appliance.
E-&~&Hazard
l
Checkwithaqualifiedelectricianifyouareindoubtastowhethertheapplianceisp~perlygrounded.
Improper connection of the equipment-grounding
conductor can result in electrical shock.
l
This appliance must be properly grounded.
Failure to do so may result in electrical shock or other personal injury,
l
Do Not use an extension cord with this appliance. Such use may result in a fire, electrical shock
or other personal injury
l
Do Not have a fuse in the neutral or grounding circuit. This could result in electrical shock or other
personal injury
A 12@volt, 60-Hz, AC only, 15- or 20-ampere,
fused electrical
supply (located
in the upper cabinet
as close
as possible to the microwave
oven) is required.
(Timedelay
fuse or circuit
breaker is recommended.)
It
is recommended
that a separate circuit serving only this appliance
be provided.
Recommended
grounding
method
Do Not, under any circumstances, remove the power supply cord grounding prong.
For your personal safety, this appliance
must be grounded.
This appliance
is equipped
with a power supply
cord having a 3-prong grounding
plug. To minimize
possible shock hazard, the cord must be plugged
into
a mating 3-prong grounding
type wall receptacle,
grounded
in accordance
with the National
Electrical
Code,
ANSVNFPA
7Watest edition,
and local codes and ordinances.
(See Figure 1.) If a mating wall receptacle
IS
not available,
it is the personal responsibility
and obligation
of the customer
to have a properly
grounded,
3prong
wall receptacle
installed
by a qualified
electrician.
3-prong
grounding Plug
powei supply cord
I\
0
grounding prong
t
3-prong grounding
type wall receptacle
Figure 1
Electrical Shock Hazard
l
Ike special care when drilling holes into the wall. Electrical wires may be concealed behind the wall
covering and contact with them could result in electrical shock
l
Locate any electrical circuits that could be affecW by the installation of this product and disconnect
power circuit
Failure to do so could result in electrical shock
3