Makita 6202D Manual de instruções - Página 10

Procurar online ou descarregar pdf Manual de instruções para Perfurar Makita 6202D. Makita 6202D 16 páginas. Cordless driver drill equipped with electric brake

Imprimir página

Adjusting fastening torque

4.5 ( 1 1/64',)

4.8 13/16")

5.1 113164'1

5.5 17/32',)

The fastening torque can be adjusted in six

stages by turning the adjusting ring so that

the pointer on the adjusting ring points t o

a number on the tool body. The fastening

torque is minimum when the pointer points

t o the number

and maximum when it

points to the

marking. The clutch

will slip a t varying torque levels when the

pointer is set a t the numbers 1 to

The

clutch is designed not to slip

a t

the

*\-

marking.

2.9

3.2 17/64'

118'7

3.1

3.4 (1/8"

9/64")

3.3

3.6 (1/8"

9/64"]

3.7

3.9 19/64"

5/32',)

Before actual operation, drive a trial screw into your material or

piece of duplicate

material t o determine which torque level i s required for a particular application.

NOTE :

The adjusting ring cannot be locked with ihe pointer positioned half-way between the

numbers.

Screwdriving operation

Place the point of the driver bit in the

screw head and apply pressure t o the tool.

Start the tool slowly and then increase the

speed gradually. Release the trigger as soon

as the clutch cuts in.

NOTE :

Make sure that the driver bit is inserted straight in the screw head, or the screw and/or

bit may be damaged.

*When driving wood screws, predrill pilot

holes to make driving easier and t o pre-

vent splitting of the workpiece. See the

chart.

5.8 17/32")

6.1 ( 1 5 / 6 4 ' )

4.0

4.2 (5132''

11/64',)

4.2

4.4 (11/64"

11/64")