Gardena 9334-20 Manual de Instruções - Página 7
Procurar online ou descarregar pdf Manual de Instruções para Ventilador Gardena 9334-20. Gardena 9334-20 9 páginas. Electric blower/vac
Imprimir página
Removing an object from the air intake:
1. Remove the vacuum tubes.
2. Carefully reach into the vacuum opening and clear out the air intake
area. Clear all debris from impeller.
3. Inspect the impeller for cracks. If cracked or damaged, do not use the
unit. Have parts replaced by your authorized service dealer. Do not
attempt to replace them yourself.
6. TROUBLESHOOTING
WARNING! Always stop unit and unplug the extension cord
before performing all of the recommended remedies
below except remedies that require unit to be operating.
The motor must be stopped and the impeller blades no longer turning to
avoid serious injury from the rotating blades.
Problem
Possible Cause
Unit fails to operate
1. Switch in the OFF (0)
position.
2. Extension cord
disconnected.
3. Circuit breaker tripped,
or fuse blown.
4. Blower tube, elbow tube,
and/or vacuum tube not
installed correctly.
5. Collection bag is full.
6. Mechanical failure.
Unit vibrates abnormally
1. Mechanical failure.
Impeller will not
1. Debris in air intake area.
turn freely
2. Mechanical failure.
NOTE: For any other malfunctions please contact the GARDENA service depart-
ment. Repairs must only be done by GARDENA service departments or specialist
dealers approved by GARDENA.
7. TECHNICAL DATA
Electric Blower / Vac
Unit
Value
ErgoJet 2500 (EJ2500)
(Art. 9334)
Motor – power consumption W
Max. 2300
Mains voltage
V
220 – 240
Mains frequency
Hz
50
Vacuum flow
l/s
170
Mulch ratio
14:1
Blow speed
km/h
Max. 310
Weight blower/vacuum
kg
Max. 4.8
Capacity of debris bag
l
45
Sound pressure level L
87
1)
dB (A)
PA
Uncertainty k
1.0
PA
Sound power level L
2)
WA
measured / guaranteed
dB (A)
102 / 103
Hand/arm vibration a
m/s
< 2.7
1)
2
vhw
NOTE: The stated vibration emission value has been measured according to
a standardized test procedure and can be used for comparison of one electric
power tool with another. It can also be used for preliminary evaluation of
exposure. The vibration emission value can vary during actual use of the electric power
tool.
8. SERVICE / WARRANTY
Service:
Please contact the address on the back page.
Warranty statement:
In the event of a warranty claim, no charge is levied to you for the services
provided.
20
GARDENA Manufacturing GmbH grants a warranty for all original
GARDENA new products for two years from the date of original purchase
from the retailer, provided that the devices have been for private use
only. This manufacturer's warranty does not apply to products acquired
second hand. This warranty includes all significant defects of the product
that can be proved to be material or manufacturing faults. This war ranty
is fulfilled by supplying a fully functional replacement product or by repair-
ing the faulty product sent to us free of charge; we reserve the right to
choose between these options. This service is subject to the following
provisions:
• The product has been used for its intended purpose as per the recom-
mendations in the operating instructions.
• Neither the purchaser nor a third party has attempted to open or repair
the product.
• Only Original GARDENA replacement parts and wear parts have been
used for operation.
• Presentation of the receipt.
Normal wear and tear of parts and components (such as blades, blade fix-
Remedy
ing parts, turbines, light bulbs, V-belts / toothed belts, impellers, air filters,
spark plugs), visual changes, wear parts and consumables are excluded
1. Slide switch to ON (I)
from the warranty.
position.
This manufacturer's warranty is limited to replacement and repair of prod-
2. Reconnect extension cord.
ucts in accordance with the abovementioned conditions. The manufactur-
er's warranty does not constitute an entitlement to lodge other claims
3. Reset circuit breaker or fuse.
against us as a manufacturer, such as for damages. This manufacturer's
warranty does not, of course, affect statutory and contractual warranty
4.Check tube installation.
claims against the dealer / retailer.
The manufacturer's warranty is governed by the law of the Federal
5. Empty collection bag.
Republic of Germany.
6. Contact your authorized
In case of a warranty claim, please return the faulty product, together with
service dealer.
a copy of the receipt and a description of the fault, with postage paid to
the service address.
1. Contact your authorized
service dealer.
Consumables:
1. Clean unit. Remove any
debris.
The blower tube and vacuum tubes are wearing parts and are not covered
by the guarantee.
2. Contact your authorized
service dealer.