Alien Aircraft Corp AK-504 BB Instruções de montagem - Página 3
Procurar online ou descarregar pdf Instruções de montagem para Brinquedo Alien Aircraft Corp AK-504 BB. Alien Aircraft Corp AK-504 BB 5 páginas. Internal bombay
Imprimir páginaBuilding the Internal Bombay
1...Place a small drop of thin C/A glue into the small holes in
parts B-02, B-03 and B-05. This will soak into the wood to
harden it. Also apply a small amount of glue to the edges near
the holes.
When the glue is dry, test fit a 2-56 screw into the holes in B-
02 and B-03. The screw should just fit loosely into the holes.
Drill out the holes slightly if the fit is tight.
2...Tack glue parts B-01, B-02 and B-03 together with several
small drops of glue. Use just enough glue to hold the parts
together loosely.
3...Slide B-05 down onto the assembly from the top. The
cutouts in B-05 should be at the back end (short end) of the
bombay. Make sure that it is seated on top of the legs on the
B-02 and B-03 parts. Place part B-04 into place on the top of
the bombay.
Wiggle the parts around to make sure that all parts are seated
and tight against each other. Also, make sure that the bombay
is squared up.
Now, securely glue all of the parts together using thin C/A glue.
4...Glue one B-08 to each B-07 as shown. Be sure to make two
left hand and two right hand. Harden the holes with glue.
Page 3