Alien Aircraft Corp AK-504 BB 조립 지침 - 페이지 3

{카테고리_이름} Alien Aircraft Corp AK-504 BB에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Alien Aircraft Corp AK-504 BB 5 페이지. Internal bombay

Building the Internal Bombay

1...Place a small drop of thin C/A glue into the small holes in

parts B-02, B-03 and B-05. This will soak into the wood to

harden it. Also apply a small amount of glue to the edges near

the holes.

When the glue is dry, test fit a 2-56 screw into the holes in B-

02 and B-03. The screw should just fit loosely into the holes.

Drill out the holes slightly if the fit is tight.

2...Tack glue parts B-01, B-02 and B-03 together with several

small drops of glue. Use just enough glue to hold the parts

together loosely.

3...Slide B-05 down onto the assembly from the top. The

cutouts in B-05 should be at the back end (short end) of the

bombay. Make sure that it is seated on top of the legs on the

B-02 and B-03 parts. Place part B-04 into place on the top of

the bombay.

Wiggle the parts around to make sure that all parts are seated

and tight against each other. Also, make sure that the bombay

is squared up.

Now, securely glue all of the parts together using thin C/A glue.

4...Glue one B-08 to each B-07 as shown. Be sure to make two

left hand and two right hand. Harden the holes with glue.

Page 3