Align-Pilates C1 Manual de instruções de montagem - Página 11

Procurar online ou descarregar pdf Manual de instruções de montagem para Equipamento de fitness Align-Pilates C1. Align-Pilates C1 16 páginas. Full cadillac

Imprimir página

Notes on Safe Usage

The equipment is intended for use for recognised Pilates repertoire only, by or, under the instruction of a

qualified Pilates professional. Access to the equipment by children without a qualified professional in

attendance must be prevented.

The C1 & A2 Half and Full Cadillac's and related accessories are designed for inside use only and on a

level floor with suitable clearance around the equipment for safe operation. This free area should be not

less than 0,6 m greater than the training area in the directions from which the equipment is accessed. The

free area must also include the area for emergency dismount. Where equipment is positioned

adjacent to each other the value of the free area may be shared.

The maximum user weight for the equipment is 150Kg. When using the Full Cadillac it is not

recommended to take your centre of gravity outside the frame as this may affect the stability of the

equipment and could result in an accident. Recognised Pilates repertoire does not recommend this any-

way.

Particular care must be taken when using the swing through bar. The safety strap MUST be used when the

push-through springs are attached to the push-through bar from the bottom side. If you do not take this

precaution, the user can get seriously injured. Further the user must never let go of the swing bar when

under spring tension.

Periodic Maintenance

Please check the apparatus before first use and after each of the first few uses to check that all the fittings

are securely fastened. Thereafter it is important to follow a regular maintenance schedule by someone

familiar with the equipment and record your maintenance checks. Equally inspection should be made

immediately if any part appears not be operating correctly or something appears to be loose. Below

follows a basic maintenance guide though our detailed maintenance guide and a sample maintenance

log can be downloaded from

• Springs & Spring Clips

Inspect all springs for signs of wear, look for deformation, kinks, gaps and corrosion. Springs showing

signs of damage must not be used and must be replaced immediately. Check all spring clips and

carabiners for signs of wear, ensuring there is no deformation and that the "gates" firmly engage.

Springs must be replaced every 2 years.

• Hardware

Ensure all nuts, bolts and screws are securely fastened.

• Slings, Loops & Handles

Check all stitching for wear and damage and replace immediately as needed.

• Travelling Carriages

Inspect travelling carriages to ensure threaded bolts are secure. Test to ensure the locking push pins

engage securely into the upright frame.

• Eyelets & Spring Hooks

Hand check all eyelets on the sliding spring eyelets, swing through and roll down bar are tight and

cannot rotate. If loose remove, apply blue Loctite and retighten.

• Feet Level

Confirm bed is level and all the feet are in contact with the ground or this will affect stability

• Star Knobs

Check wear and replaced as needed.

• Push-through Bar

Confirm all push-through bar bolts and nuts are securely fastened.

• Upholstery

Regularly clean all upholstery on your Align equipment, we recommend using Gym Wipes from Vital

Clean (www.vital-clean.de) as these will not damage your upholstery. Beware that some bactericides

and strong or abrasive cleaning products will dry out the vinyl and reduce its life. Vinyl is

non-absorbent, so will not absorb dirt so surface wiping is all that is required

https://www.mad-hq.com/align-pilates-resources