alkitronic H Series Manual de operação e manutenção - Página 8

Procurar online ou descarregar pdf Manual de operação e manutenção para Ferramenta eléctrica alkitronic H Series. alkitronic H Series 16 páginas. Hydraulic torque wrench

Imprimir página

alkitronic H Series Manual de operação e manutenção

Operation and Maintenance Manual

Procedure:

• Press the push button (1) and hold it down. Pull the square

drive (2) out of the housing. Remove the push button.

• After the exchange, put it together in the reverse order

and secure the square drive (2) with the push button (1)

again.

• Check that the push button is firmly connected to the

insert.

Push button

Push button (1)

After replacements, check inserts or adapters are

properly secured. Otherwise serious personal inju-

ries or damage to the tool may occur.

3.5 Preparing for bolting - alkitronic® H-AX

Assembling the alkitronic® H-AX

• Select the H-AX hexagon link (1) corresponding to the

joint. Make sure the hexagon link is suitable for the drive

unit (2). Do not use the hexagon links of any other tools.

• Push the H-AX drive unit without twisting into the hexa-

gon link up to the stop. By inserting the standard link bolt

(3) completely both parts of the tool are firmly connected

and secured.

Standard-link bolt (3)

H-AX-link (1)

Square drive AVS (2)

Assembly

H-AX-drive unit (2)

Changing the hexagon link

• Remove the link bolt (3) and pull the drive unit out (2) from

the hexagon link.

• Assembly as described above.

Standard-link bolt (3)

To reduce the spanner width, an optional alkitronic®

STA (5) can be used in the hexagon link drive.

Setting the rotation (tightening/loosening)

• The rotation is changed by reversing the alkitronic® H-AX

Torque Wrench by 180

the housing of the hexagon link.

Reaction

moment

Rotation CW

Tighten

3.5.1 Support of reaction moment / Support points

A safe and stable counter mounting is essential.

Improper support may lead to damage to the tool

or injury to the operator due to high reaction forces

generating from the tool.

Place the reaction surface (1) of the H-AX hexagon link (Fig. 3)

against an adjacent nut, flange or solid system component.

H-AX-Drive unit (2)

alkitronic® STA (5)

. The bolting direction is marked at

Reaction

moment

Rotation CCW

Loosen