Garmin Colorado 400c Manual do Proprietário - Página 30

Procurar online ou descarregar pdf Manual do Proprietário para Equipamento marítimo Garmin Colorado 400c. Garmin Colorado 400c 40 páginas. Oregon series
Também para Garmin Colorado 400c: Manual do Proprietário (48 páginas), Manual de referência rápida (2 páginas), Manual de início rápido (2 páginas), Manual do Proprietário (48 páginas), Informações de segurança importantes (48 páginas), Manual do Proprietário (26 páginas), (Dinamarquês) Manual (48 páginas)

Garmin Colorado 400c Manual do Proprietário
c
F
400c
ustomIzIng the
IshFInder
To adjust the Keel Offset:
1. Highlight Keel Offset, and press SELECT.
2. Use the ROCKER to set the value of the keel offset.
3. Press SELECT to accept the number.
NOtE: Press MENU to cancel your changes and return to the
Transducer menu.
Calibrate Water Speed—to use a speed sensing transducer, use
this menu to calibrate the speed sensor. If you are not using a speed
sensing transducer, this menu does not appear.
To calibrate the speed sensor:
1. Highlight Calibrate Water Speed, and press SELECT.
2. Bring the boat to cruising speed. Note your top speed, and
then stop the boat.
3. Highlight OK, and press SELECT.
NOtE: If the boat is not moving fast enough or the speed sensor
is not registering a speed, a "Speed too low" message appears.
Highlight OK, press SElECt, and safely increase boat speed. If
you get the message again, stop the boat and make sure the speed
sensor wheel is not stuck. If the wheel turns freely, check the
cable connections. If you continue to get the message, contact
Garmin Product Support.
4

Customizing Units of Measure

To change the units of measure, on the Configure screen, highlight
Units, and press SElECt.
Depth—select Feet (ft), Meters (m), or Fathoms (fa).
Water temp —select Fahrenheit (°F) or Celsius (°C) (with a
compatible transducer).
Water Speed—select Miles/Hour (mh), Kilometers/Hour (kh), or Knots
(kt) (with a compatible transducer).
Distance—select Statute (mi), Metric (km), or Nautical (nm) (with a
compatible transducer).
Fishfinder 400C Owner's Manual