AEG F89078VI-S Manual Geral - Página 36

Procurar online ou descarregar pdf Manual Geral para Máquina de lavar loiça AEG F89078VI-S. AEG F89078VI-S 43 páginas. 18” fully integrated dish washer
Também para AEG F89078VI-S: Manual do utilizador (35 páginas), Manual do utilizador (20 páginas)

Imprimir página

5.2

Cleaning the water intake fi lter

Clean the water inlet fi lter at regular intervals. After closing the delivery tap, un-

screw the ring nut (ref. A fi g. 5-01) on the water inlet pipe (using a pair of pliers,

if necessary) and delicately clean the fi lter, removing deposits or impurities. Then

fi rmly fi x the pipe by tightening the ring nut (ref. A fi g. 5-01) (use a pair of pliers,

if necessary).

5.3

Cleaning the spray arms

The spray arms can be easily removed for periodic cleaning of the nozzles, to pre-

vent possible clogging. Wash them under running water (at room temperature)

and carefully replace them in their seats, checking that their rotary movement

is in no way impeded; if this is not the case, make sure they have been mounted

properly.

Removing the spray arms

• To remove the upper spray arm (ref. A fi g. 5-02), unscrew the locking ring (ref.

B fi g. 5-02) by turning it clockwise. After cleaning, remount the spray arm in its

seat and tighten the locking ring by turning it anti-clockwise.

•

To remove the lower spray arm (ref. A fi g. 5-03), simply lift it up, pulling by the

central part (see fi g. 5-03). Then remount the lower spray arm into its seat and

push it down slightly until it click into place (see fi g. 5-03).

USER INSTRUCTIONS

Fig. 5-01

Rev 0.0