Garmin NMEA 2000 Manual de instruções de instalação - Página 2

Procurar online ou descarregar pdf Manual de instruções de instalação para Equipamento marítimo Garmin NMEA 2000. Garmin NMEA 2000 10 páginas. Technical reference for garmin nmea 2000 products
Também para Garmin NMEA 2000: Ficha de dados (1 páginas), Referência técnica (30 páginas), Referência técnica (42 páginas), Manual de instruções (20 páginas), Manual de instruções de instalação (40 páginas), Referência (42 páginas), Referência técnica (20 páginas)

Garmin NMEA 2000 Manual de instruções de instalação
Packing List, Accessories, and Tools Needed
Before installing your unit, confirm that your package includes the following items. If any parts
are missing, contact your Garmin dealer immediately.
Standard Package
GXM 51 Antenna
Surface-mount bracket
Pole-mount bracket
Under-deck mount bracket
Mounting hardware (screws and adhesive
pads)
NMEA 2000 T-connector
NMEA 2000/audio cable 19 ft., 8 in. (6 m)
Audio adapter cable 1 ft. (30.5 cm)
Installation instructions
Optional Accessories
Additional NMEA 2000 network
components
Audio adapter cable extensions
Step 1: Mount the GXM 51 Antenna
You can surface mount the GXM 51 antenna, attach it to a standard 1 in. OD pipe-threaded-pole
marine mount (14 threads-per-inch—not included), or even install the antenna under fiberglass.
Select a suitable location for the GXM 51
antenna on your boat. To ensure the best
reception, mount the GXM 51 antenna in a
location that has a clear, unobstructed view of
the sky in all directions.
Avoid mounting the GXM 51 antenna
where it is shaded by the superstructure of
the boat, a radome antenna, or a mast.
On a sailboat, avoid mounting the GXM 51
antenna high on the mast.
The GXM 51 antenna provides more-stable
reception when located nearer to water
level.
Mount the GXM 51 antenna at least 3.3 ft. (1 m) away from (preferably above) the
path of any radar beam or a VHF radio antenna.
Temporarily secure the antenna in the preferred mounting location and test it for correct
operation. If you experience interference with other electronics, try a different location. After
verifying correct operation, permanently mount the antenna.
Tools Needed
Drill
Drill bits—
/
in. (3 mm) and
1
8
(19 mm)
Hole saw, 1 in. (25 mm)—surface-mount
cable hole
Screwdriver—surface-mount screws
Pencil (to mark surface-mount pilot holes)
Countersink bit (when mounting on
fiberglass)
Marine sealant (for some mounting
options)
Better
Better
EMI
EMI
EMI (Electromagnetic Interference)
EMI (Electromagnetic Interference)
from engine components
from engine components
Above - best
Above - best
Below - OK
Below - OK
Radar
Radar
GXM 51 Placement Considerations
GXM 51 Placement Considerations
GXM 51 Installation Instructions
/
in.
3
4
Best
Best
Good
Good
3 ft.
3 ft.
(1 m)
(1 m)
VHF Radio Antenna
VHF Radio Antenna