Brother QL-700 Manual do utilizador - Página 5

Procurar online ou descarregar pdf Manual do utilizador para Fabricante de etiquetas Brother QL-700. Brother QL-700 8 páginas. Ql series
Também para Brother QL-700: Manual do utilizador do software (40 páginas), Manual de configuração rápida (2 páginas), Manual do utilizador do software (48 páginas), Manual de configuração rápida (2 páginas), Manual de início rápido (2 páginas), Manual do utilizador (8 páginas)

Remove the backing paper

cleaning sheet into the printing unit until it reaches the area shown

by an arrow in the diagram below.

•

Insert the sheet without removing the

•

Check that the printing surface of the cleaning sheet is facing upwards.

Close the DK Roll compartment cover and press the ON/OFF

button (

) to turn the Brother QL-700 on.

Press the Feed button for more

than one second.

The roller spins by 4" (10 cm).

The adhesive face of the cleaning sheet

removes the stain or dust on the roller.

•

If you do not press the Feed button for

more than one second, the roller spins

only 1/3" (8 mm).

•

Dispose of the cleaning sheet after

use.

Label outlet maintenance

If a label causes the machine to jam

due to glue attached to the label outlet,

remove the power cord and clean the

label outlet with a cloth dipped into

ethanol or isopropyl alcohol.

and feed the edge

part of the sheet.

Feed button

Label outlet

of the