Brother QL-700 Kullanıcı Kılavuzu - Sayfa 5

Etiket makinesi Brother QL-700 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Brother QL-700 8 sayfaları. Ql series
Ayrıca Brother QL-700 için: Yazılım Kullanıcı Kılavuzu (40 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Yazılım Kullanıcı Kılavuzu (48 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (8 sayfalar)

Brother QL-700 Kullanıcı Kılavuzu
4
Remove the backing paper
cleaning sheet into the printing unit until it reaches the area shown
by an arrow in the diagram below.
Insert the sheet without removing the
Check that the printing surface of the cleaning sheet is facing upwards.
5
Close the DK Roll compartment cover and press the ON/OFF
button (
) to turn the Brother QL-700 on.
6
Press the Feed button for more
than one second.
The roller spins by 4" (10 cm).
The adhesive face of the cleaning sheet
removes the stain or dust on the roller.
If you do not press the Feed button for
more than one second, the roller spins
only 1/3" (8 mm).
Dispose of the cleaning sheet after
use.
Label outlet maintenance
If a label causes the machine to jam
due to glue attached to the label outlet,
remove the power cord and clean the
label outlet with a cloth dipped into
ethanol or isopropyl alcohol.
and feed the edge
part of the sheet.
Feed button
Label outlet
of the
3