Fujitsu PRIMERGY 10/40GbE Manual do utilizador - Página 9
Procurar online ou descarregar pdf Manual do utilizador para Servidor Fujitsu PRIMERGY 10/40GbE. Fujitsu PRIMERGY 10/40GbE 23 páginas. Connection blade 18/8+2
Imprimir página2.5 Changing Switch Mode , IBP Mode and EHM
There are 3 modes for this product Switch mode, IBP mode and EHM. EHM is its default mode. Switch
mode works as normal Layer2 switch. EHM is basically the same as switch mode, but it prohibit the
forwarding between uplinks and STP configuration to prevent uplink Loop by some mistakes. IBP mode is
prepared for easy configuration so that a server administrator can configure it. Refer to other manuals to
know the detail of these mode
To change current mode, execute the following commands.
Change current mode to switch mode
# boot-system△mode△switch
# reset
Change current mode to IBP mode
# boot-system△mode△ibp
# reset
Change current mode to EHM
# boot-system△mode△ehm
# reset
You can check current mode with show system information command.
PRIMERGY 10/40GbE Connection Blade 18/8+2 User Guide
Page 9 / 23