Fujitsu SE500 Manual de instruções - Página 12

Procurar online ou descarregar pdf Manual de instruções para Servidor Fujitsu SE500. Fujitsu SE500 30 páginas. Server unit x86
Também para Fujitsu SE500: Manual de instruções (25 páginas)

Imprimir página

Front of the Server Unit

2.2.2 Indicators on the operating panel

ID indicator (blue)

Lights up blue when the Server Unit has been selected by pressing the ID

button. To deactivate, press the button again.

The ID indicator can also be activated via the ServerView Operations Manager

and the iRMC web interface, and its status can be reported to the ServerView

Operations Manager and the iRMC.

Status indicator (green)

Does not light up when the Server Unit is switched off but connected to the

power supply (power cable connected).

Lights up green during power up and when operating normally (S0).

Status indicator (power cable connected) (green)

on the right-hand side of the On/Off switch

Does not light up in the following cases:

–

The Server Unit is not connected to the power source

–

The Server Unit is switched on and operating normally (S0)

Lights up green when one of the following cases occurs:

–

The Server Unit is switched off but connected to the power supply (power

cable connected)

–

The Server Unit is switched on but is in the power up delay

After the Server Unit has been connected to the power source, it takes

approximately 60 seconds until the Server Unit has entered standby

mode.

HDD activity indicator (green)

Lights up green when an internal hard disk drive is being accessed.

Server Unit SU300

U41860-J-Z126-1-76