Fujitsu fi-4530C Começar a trabalhar - Página 9

Procurar online ou descarregar pdf Começar a trabalhar para Scanner Fujitsu fi-4530C. Fujitsu fi-4530C 27 páginas. Image scanner
Também para Fujitsu fi-4530C: Manual de procedimentos de instalação (7 páginas), Manual de procedimentos de instalação (9 páginas), Brochura e especificações (2 páginas), Procedimentos de instalação (3 páginas), Instruções de substituição e limpeza de consumíveis (14 páginas), Manual de instruções de limpeza (13 páginas), Instruções de limpeza (2 páginas), Manual de instruções (10 páginas), Procedimento de instalação (5 páginas)

Imprimir página

Name

Function No. display

But-

Function

tons

Send to

Scan

Power button

LED

*) About the settings on the launcher, refer to FUJITSU

TWAIN32 scanner driver help and the "fi-4530C

Operator's Guide" on the Setup CD-ROM.

■ Indications on the Function No.

display

The following shows the indications on the Function

No. display.

Blinks only one time upon turning on the scanner.

Indicates that the scanner has been turned ON and

is being initialized.

Indicates that initialization will soon be completed.

Indicates that initialization has been completed

successfully.

This status is called "Ready Status".

Indicates that a temporary error (that users can

solve) has occurred during the initialization or

scanning of documents.

"U" and an error number (1, 2, 6) are displayed

alternately.

To return the scanner to the ready status ("1"),

press the "Scan" or "Send to" button while the error

is indicated.

Function

Indicates the function No. and

error status.

Changes the Function activated

by the Send to button (*).

Launches the linked application

software (*).

Turns the scanner ON and OFF.

Lights when the scanner is

turned ON.

Indicates that a device alarm (that users can not

solve) has occurred during the initialization or

scanning of documents.

"E" and an alarm number (2 to 9, and A, c, d, F) are

indicated alternately.

To return the scanner to the ready status ("1"),

press "Scan" or "Send to" button while the alarm is

indicated.

If this alarm occurs, turn the power off and then on

again. If the alarm is indicated after turning on the

power again, contact your service engineer.