Brother MFC-660CN Manual de configuração rápida - Página 27
Procurar online ou descarregar pdf Manual de configuração rápida para Aparelho de fax Brother MFC-660CN. Brother MFC-660CN 34 páginas. Caller id
Também para Brother MFC-660CN: Manual de serviço (5 páginas), Manual de serviço (17 páginas), Manual de início rápido (3 páginas)
Imprimir página
Installing the Driver & Software
For Network Interface Users
(For Mac OS
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on pages 4 through 13.
1
Using both hands, use the plastic tabs on both
sides of the machine to lift the scanner cover
until it locks securely into the open position.
2
Connect the network cable into the LAN socket
marked with a
LAN socket inside the machine on the left as
shown below.
3
Carefully guide the network cable into the
trench as shown below, following the trench
around and toward the back of the machine.
Then, connect the cable to your network.
®
X 10.2.4 or greater)
symbol. You will find the
Improper Setup
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
If both USB and LAN cables are being used, guide
both cables through the trench with one on top of
the other.
4
Lift the scanner cover to release the lock (
Gently push the scanner cover support down
(
) and close the scanner cover (
Note
Make sure that the machine is turned on by
connecting the power cord.
®
Macintosh
).
).
25