Brother MFC-660CN Посібник з швидкого налаштування - Сторінка 27

Переглянути онлайн або завантажити pdf Посібник з швидкого налаштування для Факсимільний апарат Brother MFC-660CN. Brother MFC-660CN 34 сторінки. Caller id
Також для Brother MFC-660CN: Посібник з експлуатації (5 сторінок), Посібник з експлуатації (17 сторінок), Посібник із швидкого старту (3 сторінок)

Installing the Driver & Software

For Network Interface Users

(For Mac OS

Important

Make sure that you have finished the

instructions from Step 1 Setting Up the

Machine on pages 4 through 13.

Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

Connect the network cable into the LAN socket

marked with a

LAN socket inside the machine on the left as

shown below.

Carefully guide the network cable into the

trench as shown below, following the trench

around and toward the back of the machine.

Then, connect the cable to your network.

X 10.2.4 or greater)

symbol. You will find the

Improper Setup

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Note

If both USB and LAN cables are being used, guide

both cables through the trench with one on top of

the other.

Lift the scanner cover to release the lock (

Gently push the scanner cover support down

(

) and close the scanner cover (

Note

Make sure that the machine is turned on by

connecting the power cord.

Macintosh