Fujitsu FI-5900C Começar a trabalhar - Página 27

Procurar online ou descarregar pdf Começar a trabalhar para Scanner Fujitsu FI-5900C. Fujitsu FI-5900C 30 páginas. Consumable replacement and cleaning instructions
Também para Fujitsu FI-5900C: Começar a trabalhar (30 páginas), Manual de procedimentos de instalação (7 páginas), Manual de procedimentos de instalação (9 páginas), Procedimentos de instalação (3 páginas), Brochura e especificações (2 páginas), Manual suplementar (4 páginas), Brochura e especificações (4 páginas), Instruções de substituição e limpeza de consumíveis (24 páginas), Procedimento de substituição (22 páginas), Instruções de limpeza (2 páginas)

Imprimir página
Fujitsu FI-5900C Começar a trabalhar
Appendix 3
During its operation, the inside
AUTION
glass of the ADF becomes very
hot.
Before replacing the
consumables, turn its power off
and unplug the AC adapter from
the outlet. Wait at least
15 minutes.
■ Consumables and Replacement
Cycle
The followings are the specifications of consumables
and their recommended replacement cycles.
Description
Parts No.
Pad
PA03450-
K014
Pick rollers
PA03450-
K011
Brake roller
PA03450-
K013
Separator
PA03450-
rollers
K012
To purchase consumables, contact the store where you
purchased the scanner or an authorized FUJITSU scanner
service provider.
The replacement cycles above are rough guidelines
when scanning A4/Letter sized, 20lb paper. This clean-
ing cycle varies according to the type of papers scanned
and how frequently the scanner is used and cleaned.
Use only the specified consumables.
ATTENTION
REPLACING CONSUMABLES
Standard
Replacement Cycle
After 600,000 scans or
one year
After 600,000 scans or
one year
After 600,000 scans or
one year
After 600,000 scans or
one year
fi-5900C Image Scanner Getting Started
The following illustrations show the locations of the
consumables. Refer to "5. REPLACEMENT OF CON-
SUMABLES" in the fi-5900C Operator's Guide on the
Setup CD-ROM.
Pick roller
Pad
■ Pad
To remove
Separator roller
Brake roller
Pad
To install
5
AP-