Fujitsu FI-5900C 시작하기 - 페이지 27

{카테고리_이름} Fujitsu FI-5900C에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-5900C 30 페이지. Consumable replacement and cleaning instructions
Fujitsu FI-5900C에 대해서도 마찬가지입니다: 시작하기 (30 페이지), 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 브로셔 및 사양 (2 페이지), 보충 설명서 (4 페이지), 브로셔 및 사양 (4 페이지), 소모품 교체 및 청소 지침 (24 페이지), 교체 절차 (22 페이지), 청소 지침 (2 페이지)

페이지 인쇄
Fujitsu FI-5900C 시작하기
Appendix 3
During its operation, the inside
AUTION
glass of the ADF becomes very
hot.
Before replacing the
consumables, turn its power off
and unplug the AC adapter from
the outlet. Wait at least
15 minutes.
■ Consumables and Replacement
Cycle
The followings are the specifications of consumables
and their recommended replacement cycles.
Description
Parts No.
Pad
PA03450-
K014
Pick rollers
PA03450-
K011
Brake roller
PA03450-
K013
Separator
PA03450-
rollers
K012
To purchase consumables, contact the store where you
purchased the scanner or an authorized FUJITSU scanner
service provider.
The replacement cycles above are rough guidelines
when scanning A4/Letter sized, 20lb paper. This clean-
ing cycle varies according to the type of papers scanned
and how frequently the scanner is used and cleaned.
Use only the specified consumables.
ATTENTION
REPLACING CONSUMABLES
Standard
Replacement Cycle
After 600,000 scans or
one year
After 600,000 scans or
one year
After 600,000 scans or
one year
After 600,000 scans or
one year
fi-5900C Image Scanner Getting Started
The following illustrations show the locations of the
consumables. Refer to "5. REPLACEMENT OF CON-
SUMABLES" in the fi-5900C Operator's Guide on the
Setup CD-ROM.
Pick roller
Pad
■ Pad
To remove
Separator roller
Brake roller
Pad
To install
5
AP-