Aqua Comfort AC150 Manual do Proprietário - Página 7

Procurar online ou descarregar pdf Manual do Proprietário para Aquecedor de piscinas Aqua Comfort AC150. Aqua Comfort AC150 12 páginas.

ELECTRONIC CONTROL PANEL

DIGITAL DISPLAY

Displays the actual pool/spa

temperature. In select mode

displays other parameters.

SELECT/SERVICE KEY

Used to select mode of

operation and enter service

mode.

Selecting the desired mode of operation is accomplished by pressing the SELECT KEY.

Temperature Setpoint

• Temperature setpoint maximum for POOL mode is 95°F (35°C).

• Temperature setpoint maximum for SPA mode is 104°F (40°C).

To change the temperature setpoint, press the SELECT KEY until you reach either POOL or SPA. This will

prompt the control to display the current temperature setpoint. Hold either the UP or DOWN key to scroll

your desired temperature setpoint. Once your new temperature setpoint has been reached, release the UP or

DOWN key. Your new setpoint will be displayed for five seconds, then revert back to the actual pool or spa

water temperature.

Selecting Pool or Spa Mode

Press the SELECT KEY until you reach P_S. Pressing the UP or DOWN key will allow you to enter either

POOL or SPA mode. Green LED indicator lights will verify the mode selected.

FIL MODE MUST BE IN THE OFF POSITION OR A FLO3 ERROR CODE WILL BE DISPLAYED.

Selecting temperature in Fahrenheit or Celsius

The factory setting is Fahrenheit. Press the SELECT KEY until you reach F_C. Press the UP KEY to reach

Fahrenheit or the DOWN KEY to reach Celsius.

MODE SELECTION

POOL LED

indicates pool mode.

HEAT ON LED

indicates heat is on.

SPA LED

indicates spa mode.

INCREASE KEY

DECREASE KEY