Aqua Creek Products F-SCTXL-T Manual - Página 4

Procurar online ou descarregar pdf Manual para Sistemas de elevação Aqua Creek Products F-SCTXL-T. Aqua Creek Products F-SCTXL-T 15 páginas.

LIFT THE SCOUT EXCEL MAST ASSEMBLY FROM THE SHIPPING CONTAINER.

INSERT THE 1.90" [48mm] POST OF THE MAST ASSEMBLY INTO THE DECK

ANCHOR. EASE THE MAST ASSEMBLY DOWN UNTIL IT RESTS ON THE DECK

SURFACE. ROTATE THE BASE UNTIL THE FIXING ANCHOR HOLE LINES UP

WITH THE FIXING ANCHOR. INSTALL THE 1/2"-13X1 1/2" HEX BOLT AND

WASHER (PROVIDED IN THE STOCK BOX) TO HOLD DOWN THE LIFT. TIGHTEN

THE BOLT.

FIXING ANCHOR HOLE

POST

FIG. 01

REMOVE THE SHIPPING STRAP

AND ALL PACKING FROM THE

ACTUATOR. CONNECT THE LIFTING

ARM BETWEEN THE MAST AND THE

ACTUATOR. TIGHTEN NYLOCK NUTS.

PRODUCT ASSEMBLY

NOTE: THE LIFTING AND CONTROL

ARM ARE EASILY FLIPPED AROUND

THE WRONG WAY. MAKE SURE

THAT "A" MATCHES UP TO "A" AND

"B" GOES TO "B"

FIG. 02

NOTE: BE CAREFUL NOT TO OVER-

TIGHTEN BOLTS. OVER-TIGHTENING

CAN CAUSE DAMAGE AND COMPROMISE

THE SAFETY OF YOUR LIFT.

Aqua Creek Products

DETAIL A

SCALE 1 : 1

6/27/2022 8:55:18 AM PAGE - 4