AVPro Edge AC-DA28-AUHD Manual do utilizador - Página 14

Procurar online ou descarregar pdf Manual do utilizador para Cabos e conectores AVPro Edge AC-DA28-AUHD. AVPro Edge AC-DA28-AUHD 20 páginas. 18gbps 2x8 distribution amp with 2 output zones, hdr

Imprimir página

AC-DA28-AUHD

Web Interface: System Settings

IP Settings:

Set network settings such as:

• Static IP

• Subnet Mask

• Router IP

• TCP Port

• Enable DHCP

RS-232 and TCP/IP Commands

The AC-DA28-AUHD can be controlled with either RS-232 or TCP/IP commands. Certain switching or

format configurations can only be done using these commands. We recommend using either the MyUART

(RS-232 - free) or Hercules (TCP/IP - free) apps as they are very easy to use for sending commands to the

machine.

MyUart is availble for download on our website https://www.avproedge.com/drivers.html

For TCP/IP control commands use Telnet Port 23.

For RS-232, use a null modem serial cable adapter and set the serial communications to: 57600,n,8,1 (baud:

57600, no parity, 8 data bits and 1 stop bit) with no handshaking.

Please add a return (Enter key) after each command when using direct commands. .

The unified command list (ASCII) is listed on the next page.

Port Alias Settings:

Rename inputs and outputs for easy management. Each

custom name is limited to eight (8) characters.

Page 14